KODIPAK meat and fruit double chamber vacuum packing machine

About kodipak double chamber vacuum packing machine

 A double chamber pneumatic vacuum packaging machine has two chambers. One of the two operates while the other is closed, then the other one operates while the first one is closed. This alternating system can provide efficiency and avoid boredom for the operator. It also helps to cut down on labor intensity.

Machine technical

1.  A microcomputer control system is used for controlling the vacuum and seal time precisely for different packing material and packing requirement. This can be done with an easy-to-use interface.
2.  A big-capacity vacuum pump can achieve maximum vacuum degree in a short time and improve the efficiency of the appliance.
3.  The machine is made with a flat vacuum cleaner design. The steel is all #304 stainless steel, which is rust-resistant and easy to clean.
4.   This machine packs a punch. The high-density chamber lid gasket guarantees a seal in routine work and is resistant to compression and wear. This means the sealing tape will last longer and the machine will need less maintenance.
5.  The emergency stop switch is a safety measure that can be pressed in case of an emergency. This will help to terminate all ongoing work programs and preserve the safety of both equipment and personnel.

Machine Specifications

Model	KDC-400	KDC-500	KDC-600	KDC-700	KDC-800
Machine chamber size	400*390*110mm	500*490*110mm	600*590*120mm	700*690*190mm	920*780*220mm
Length of the Seal:	400mm *4	500mm *4	600mm *4	700*4	800*4
Sealing width	8 & 10mm	8 & 10mm	8 & 10mm	8 & 10mm	8 & 10mm
Voltage	110/220V 1P	110/220V 1P	110/220V 1P	380/415v 3p	380/415v 3p
Power	1.5kw	2.5kw	3.5kw	5.6kw	6.5kw
Capacity	2-3 cycles / min	2-3 cycles / min	2-4 cycles / min	2-4 cycles / min	2-5 cycles / min
Weight	120kg	200kg	300kg	450kg	500kg
Dimensions:	950*620*900	1350*740*960	1450*740*960	1765*795*1002	1950*950*1250

Machine sample pictures

Machine work video

Machine sample pack picture

Kodipak FAQ

Q: Are you a factory or trading company?

A: We are an experienced factory located in nantong jiangsu and found in 1995.

Q:Can you design the machine according to our requirements?

A:Here at This Company, we make sure to customize your machine to your specifications and needs. We'll do that by having a talented engineer create a custom-made product for you. That way, we can ensure that not only does it fit your requirements, but also your budget requirements too.

Q: Is there any installation direction after we received the machine?

A: Our strategy is to provide theoretical and practical training for the client company. This ensures that the equipment operator can use the machine to its full potential and optimize production.

---

Contact us 

webesite : www.kodipak.com

whatsapp/wechat: 0086 18651373711

e-mail: kodipak@kodipak.com